Shale gas
Some analysts expect that shale gas will greatly expand worldwide energy supply.[3] China is estimated to have the world's largest shale gas reserves.[4] A study by the Baker Institute of Public Policy at Rice University concluded that increased shale gas production in the US and Canada could help prevent Russia and Persian Gulf countries from dictating higher prices for the gas they export to European countries.[5]
The Obama administration believes that increased shale gas development will help reduce greenhouse gas emissions[6] (in 2012, US carbon dioxide emissions dropped to a 20-year low[7]). Human and public health will both benefit from shale gas displacing coal burning.
A 2013 review by the United Kingdom Department of Energy and Climate Change noted that most studies of the subject have estimated that life-cycle greenhouse gas (GHG) emissions from shale gas are similar to those of conventional natural gas, and are much less than those from coal, usually about half the greenhouse gas emissions of coal; the noted exception was a 2011 study by Howarth and others of Cornell University, which concluded that shale GHG emissions were as high as those of coal.[8][9] More recent studies have also concluded that life-cycle shale gas GHG emissions are much less than those of coal,[10][11][12][13] among them, studies by Natural Resources Canada (2012),[14] and a consortium formed by the US National Renewable Energy Laboratory with a number of universities (2012).[15]
Some 2011 studies pointed to high rates of decline of some shale gas wells as an indication that shale gas production may ultimately be much lower than is currently projected.[16][17] But shale-gas discoveries are also opening up substantial new resources of tight oil / "shale oil".[18]
History
US
Federal price controls on natural gas led to shortages in the 1970s.[21] Faced with declining natural gas production, the federal government invested in many supply alternatives, including the Eastern Gas Shales Project, which lasted from 1976 to 1992, and the annual FERC-approved research budget of the Gas Research Institute, where the federal government began extensive research funding in 1982, disseminating the results to industry.[2] The federal government also provided tax credits and rules benefiting the industry in the 1980 Energy Act.[2] The Department of Energy later partnered with private gas companies to complete the first successful air-drilled multi-fracture horizontal well in shale in 1986. The federal government further incentivized drilling in shale via the Section 29 tax credit for unconventional gas from 1980-2000. Microseismic imaging, a crucial input to both hydraulic fracturing in shale and offshore oil drilling, originated from coalbeds research at Sandia National Laboratories. The DOE program also applied two technologies that had been developed previously by industry, massive hydraulic fracturing and horizontal drilling, to shale gas formations.[22] that led to microseismic imaging.
Although the Eastern Gas Shales Project had increased gas production in the Appalachian and Michigan basins, shale gas was still widely seen as marginal to uneconomic without tax credits, and shale gas provided only 1.6% of US gas production in 2000, when the federal tax credits expired.[21]
George P. Mitchell is regarded as the father of the shale gas industry, by making it commercially viable in the Barnett Shale by getting costs down to $4 per million British Thermal Units.[23] Mitchell Energy achieved the first economical shale fracture in 1998 using slick-water fracturing.[24][25][26] Since then, natural gas from shale has been the fastest growing contributor to total primary energy in the United States, and has led many other countries to pursue shale deposits. According to the IEA, shale gas could increase technically recoverable natural gas resources by almost 50%.[27]
Geology
Shale has low matrix permeability, so gas production in commercial quantities requires fractures to provide permeability. Shale gas has been produced for years from shales with natural fractures; the shale gas boom in recent years has been due to modern technology in hydraulic fracturing (fracking) to create extensive artificial fractures around well bores.[citation needed]
Horizontal drilling is often used with shale gas wells, with lateral lengths up to 10,000 feet (3,000 m) within the shale, to create maximum borehole surface area in contact with the shale.[citation needed]
Shales that host economic quantities of gas have a number of common properties. They are rich in organic material (0.5% to 25%),[29] and are usually mature petroleum source rocks in the thermogenic gas window, where high heat and pressure have converted petroleum to natural gas. They are sufficiently brittle and rigid enough to maintain open fractures.
Some of the gas produced is held in natural fractures, some in pore spaces, and some is adsorbed onto the organic material. The gas in the fractures is produced immediately; the gas adsorbed onto organic material is released as the formation pressure is drawn down by the well.[citation needed]
Shale gas by country
Main articles: Shale gas by country and List of countries by recoverable shale gas
Although the shale gas potential of many nations is being studied, as
of 2013, only the US, Canada, and China produce shale gas in commercial
quantities, and only the US and Canada have significant shale gas
production.[30]
While China has ambitious plans to dramatically increase its shale gas
production, these efforts have been checked by inadequate access to
technology, water, and land. [31]The table below is based on data collected by the Energy Information Administration agency of the United States Department of Energy.[32] Numbers for the estimated amount of "technically recoverable" [33] shale gas resources are provided alongside numbers for proven natural gas reserves.
| Country | Estimated technically recoverable shale gas (trillion cubic feet) |
Proven natural gas reserves of all types (trillion cubic feet) |
Date of Report[32] |
|
|---|---|---|---|---|
| 1 |  China |
1,115 | 124 | 2013 |
| 2 |  Argentina |
802 | 12 | 2013 |
| 3 |  Algeria |
707 | 159 | 2013 |
| 4 |  United States |
665 | 318 | 2013 |
| 5 |  Canada |
573 | 68 | 2013 |
| 6 |  Mexico |
545 | 17 | 2013 |
| 7 |  South Africa |
485 | - | 2013 |
| 8 |  Australia |
437 | 43 | 2013 |
| 9 |  Russia |
285 | 1,688 | 2013 |
| 10 |  Brazil |
245 | 14 | 2013 |
| 11 |  Indonesia |
580 | 150 | 2013 |
For the United States, EIA estimated (2013) a total "wet natural gas" resource of 2,431 tcf, including both shale and conventional gas. Shale gas was estimated to be 27% of the total resource.[32] "Wet natural gas" is methane plus natural gas liquids, and is more valuable than dry gas.[35][36]
For the rest of the world (excluding US), EIA estimated (2013) a total wet natural gas resource of 20,451 trillion cubic feet (579.1×1012 m3). Shale gas was estimated to be 32% of the total resource.[32]
Europe has estimated shale gas reserves of 639 trillion cubic feet (18.1×1012 m3) compared with America's 862 trillion cubic feet (24.4×1012 m3), but its geology is more complicated and the oil and gas more expensive to extract, with a well likely to cost as much as three-and-a-half times more than one in the United States.[37]
Environment
See also: Natural gas and Hydraulic fracturing
The extraction and use of shale gas can affect the environment
through the leaking of extraction chemicals and waste into water
supplies, the leaking of greenhouse gases
during extraction, and the pollution caused by the improper processing
of natural gas. A challenge to preventing pollution is that shale gas
extractions varies widely in this regard, even between different wells
in the same project; the processes that reduce pollution sufficiently in
one extraction may not be enough in another.[2]In 2013 the European Parliament agreed that environmental impact assessments will not be mandatory for shale gas exploration activities and shale gas extraction activities will be subject to the same terms as other gas extraction projects.[38]
Climate
Barack Obama's administration has sometimes promoted shale gas, in part because of their belief that it releases fewer greenhouse gas (GHG) emissions than other fossil fuels. In a 2010 letter to President Obama, Martin Apple of the Council of Scientific Society Presidents cautioned against a national policy of developing shale gas without a more certain scientific basis for the policy. This umbrella organization that represents 1.4 million scientists noted that shale gas development “may have greater GHG emissions and environmental costs than previously appreciated.”[39]In late 2010, the U.S. Environmental Protection Agency[40] issued a new report, the first update on emission factors for greenhouse gas emissions by the oil and gas industry by the EPA since 1996. In this new report, the EPA concluded that shale gas emits larger amounts of methane, a potent greenhouse gas, than does conventional gas, but still far less than coal. Methane is a powerful greenhouse gas, although it stays in the atmosphere for only one tenth as long a period as carbon dioxide. Recent evidence suggests that methane has a global warming potential (GWP) that is 105-fold greater than carbon dioxide when viewed over a 20-year period and 33-fold greater when viewed over a 100-year period, compared mass-to-mass.[41] However, the U.N. Intergovernmental Panel on Climate Change (IPCC), a pre-eminent authority on this issue, ascribes a GWP of only 72 to methane over a 25-year period, and only 25 over a 100-year period.[42]
Several studies which have estimated lifecycle methane leakage from shale gas development and production have found a wide range of leakage rates, from less than 1% of total production to nearly 8%.[43] Using data from the Environmental Protection Agency’s most recent Greenhouse Gas Inventory[44] yields a methane leakage rate of about 1.4%, down from 2.3% from the EPA’s previous Inventory.[45]
The most comprehensive study of methane leakage from shale gas to date, initiated by the Environmental Defense Fund (EDF) and released in the Proceedings of the National Academy of Sciences on September 16, 2013,[46] finds that fugitive emissions in key stages of the natural gas production process are significantly lower than estimates in the EPA’s national emissions inventory (which are already quite low). The study reports direct measurements from 190 onshore natural gas sites across the country and estimates a leakage rate of 0.42% for gas production. Although the EDF study did not cover all stages of natural gas supply chain, subsequent studies are planned to estimate leakage rates in others parts of the system.
A 2011 study published in Climatic Change Letters controversially claimed that the production of electricity using shale gas may lead to as much or more life-cycle GWP than electricity generated with oil or coal.[47] In that peer-reviewed paper, Cornell University professor Robert W. Howarth, a marine ecologist, and colleagues claimed that once methane leak and venting impacts are included, the life-cycle greenhouse gas footprint of shale gas is far worse than those of coal and fuel oil when viewed for the integrated 20-year period after emission. On the 100-year integrated time frame, this analysis claims shale gas is comparable to coal and worse than fuel oil. However, numerous studies have pointed out critical flaws with that paper and/or come to completely different conclusions, including assessments by experts at the U.S. Department of Energy,[48] peer-reviewed studies by Carnegie Mellon University[49] and the University of Maryland,[50] and even the Natural Resources Defense Council, which concluded that the Howarth et al. paper's use of a 20-year time horizon for global warming potential of methane is "too short a period to be appropriate for policy analysis."[51]
In January 2012, Howarth's own colleagues at Cornell University, Lawrence Cathles et al., responded with their own peer-reviewed assessment, noting that the Howarth paper was "seriously flawed" because it "significantly overestimate[s] the fugitive emissions associated with unconventional gas extraction, undervalue[s] the contribution of 'green technologies' to reducing those emissions to a level approaching that of conventional gas, base[s] their comparison between gas and coal on heat rather than electricity generation (almost the sole use of coal), and assume[s] a time interval over which to compute the relative climate impact of gas compared to coal that does not capture the contrast between the long residence time of CO2 and the short residence time of methane in the atmosphere." The author of that response, Lawrence Cathles, concludes that "shale gas has a GHG footprint that is half and perhaps a third that of coal," based upon "more reasonable leakage rates and bases of comparison."[52]
In April 2013 the U.S. Environmental Protection Agency dramatically lowered its estimate of how much methane leaks from wells, pipelines and other facilities during production and delivery of natural gas by 20 percent. According to the Associated Press, the EPA report on greenhouse emissions credited tighter pollution controls instituted by the industry for cutting an average of 41.6 million metric tons of methane emissions annually from 1990 through 2010, a reduction of more than 850 million metric tons overall. The AP noted, "The EPA revisions came even though natural gas production has grown by nearly 40 percent since 1990." [53]
Water and air quality
Chemicals are added to the water to facilitate the underground fracturing process that releases natural gas. Fracturing fluid is primarily water and approximately 0.5% chemical additives (friction reducer, agents countering rust, agents killing microorganism). Since (depending on the size of the area) millions of liters of water are used, this means that hundreds of thousands liters of chemicals are often injected into the subsurface.[54] About 50% to 70% of the injected volume of contaminated water is recovered and stored in above-ground ponds to await removal by tanker. The remaining volume remains in the subsurface. Hydraulic fracturing opponents fear that it can lead to contamination of groundwater aquifers, though the industry deems this "highly unlikely". However, foul-smelling odors and heavy metals contaminating the local water supply above-ground have been reported.[55]Besides using water and industrial chemicals, it is also possible to frack shale gas with only liquified propane gas. This reduces the environmental degradation considerably. The method was invented by GasFrac, of Alberta, Canada.[56]
Hydraulic fracturing was exempted from the Safe Drinking Water Act in the Energy Policy Act of 2005.[57]
A study published in May 2011 concluded that shale gas wells have seriously contaminated shallow groundwater supplies in northeastern Pennsylvania with flammable methane. However, the study does not discuss how pervasive such contamination might be in other areas drilled for shale gas.[58]
The United States Environmental Protection Agency (EPA) announced 23 June 2011 that it will examine claims of water pollution related to hydraulic fracturing in Texas, North Dakota, Pennsylvania, Colorado and Louisiana.[59] On 8 December 2011, the EPA issued a draft finding which stated that groundwater contamination in Pavilion, Wyoming may be the result of fracking in the area. The EPA stated that the finding was specific to the Pavilion area, where the fracking techniques differ from those used in other parts of the U.S. Doug Hock, a spokesman for the company which owns the Pavilion gas field, said that it is unclear whether the contamination came from the fracking process.[60] Wyoming's Governor Matt Mead called the EPA draft report "scientifically questionable" and stressed the need for additional testing.[61] The Casper Star-Tribune also reported on 27 December 2011, that the EPA's sampling and testing procedures "didn’t follow their own protocol" according to Mike Purcell, the director of the Wyoming Water Development Commission.[62]
A 2011 study by the Massachusetts Institute of Technology concluded that "The environmental impacts of shale development are challenging but manageable." The study addressed groundwater contamination, noting "There has been concern that these fractures can also penetrate shallow freshwater zones and contaminate them with fracturing fluid, but there is no evidence that this is occurring". This study blames known instances of methane contamination on a small number of sub-standard operations, and encourages the use of industry best practices to prevent such events from recurring.[63]
In a report dated July 25, 2012, the U.S. Environmental Protection Agency announced that it had completed its testing of private drinking water wells in Dimock, Pennsylvania. Data previously supplied to the agency by residents, the Pennsylvania Department of Environmental Protection, and Cabot Oil and Gas Exploration had indicated levels of arsenic, barium or manganese in well water at five homes at levels that could present a health concern. In response, water treatment systems that can reduce concentrations of those hazardous substances to acceptable levels at the tap were installed at affected homes. Based on the outcome of sampling after the treatment systems were installed, the EPA concluded that additional action by the Agency was not required.[64]
A Duke University study of Blacklick Creek (Pennsylvania), carried out over two years, took samples from the creek upstream and down stream of the discharge point of Josephine Brine Treatment Facility. Radium levels in the sediment at the discharge point are around 200 times the amount upstream of the facility. The radium levels are "above regulated levels" and present the "danger of slow bio-accumulation" eventually in fish. The Duke study "is the first to use isotope hydrology to connect the dots between shale gas waste, treatment sites and discharge into drinking water supplies." The study recommended "independent monitoring and regulation" in the United States due to perceived deficiencies in self-regulation.[65][66]
What is happening is the direct result of a lack of any regulation. If the Clean Water Act was applied in 2005 when the shale gas boom started this would have been prevented. In the UK, if shale gas is going to develop, it should not follow the American example and should impose environmental regulation to prevent this kind of radioactive buildup.According to the US Environmental Protection Agency, the Clean Water Act applies to surface stream discharges from shale gas wells:
—Avner Vengosh[65]
- “6) Does the Clean Water Act apply to discharges from Marcellus Shale Drilling operations?
- Yes. Natural gas drilling can result in discharges to surface waters. The discharge of this water is subject to requirements under the Clean Water Act (CWA).”[67]
Earthquakes
Hydraulic fracturing routinely produces microseismic events much too small to be detected except by sensitive instruments. These microseismic events are often used to map the horizontal and vertical extent of the fracturing.[69] However, as of late 2012, there have been three instances of hydraulic fracturing, through induced seismicity, triggering quakes large enough to be felt by people in the United States.[70]On 26 April 2012, the Asahi Shimbun reported that United States Geological Survey scientists have been investigating the recent increase in the number of magnitude 3 and greater earthquake in the midcontinent of the United States. Beginning in 2001, the average number of earthquakes occurring per year of magnitude 3 or greater increased significantly, culminating in a six-fold increase in 2011 over 20th century levels. A researcher in Center for Earthquake Research and Information of University of Memphis assumes water pushed back into the fault tends to cause earthquake by slippage of fault.[71][72]
Over 109 small earthquakes (Mw 0.4–3.9) were detected during January 2011 to February 2012 in the Youngstown, Ohio area, where there were no known earthquakes in the past. These shocks were close to a deep fluid injection well. The 14 month seismicity included six felt earthquakes and culminated with a Mw 3.9 shock on 31 December 2011. Among the 109 shocks, 12 events greater than Mw 1.8 were detected by regional network and accurately relocated, whereas 97 small earthquakes (0.4<Mw<1.8) were detected by the waveform correlation detector. Accurately located earthquakes were along a subsurface fault trending ENE-WSW—consistent with the focal mechanism of the main shock and occurred at depths 3.5–4.0 km in the Precambrian basement. We conclude that the recent earthquakes in Youngstown, Ohio were induced by the fluid injection at a deep injection well due to increased pore pressure along the preexisting subsurface faults located close to the wellbore. We found that the seismicity initiated at the eastern end of the subsurface fault—close to the injection point, and migrated toward the west—away from the wellbore, indicating that the expanding high fluid pressure front increased the pore pressure along its path and progressively triggered the earthquakes. We observe that several periods of quiescence of seismicity follow the minima in injection volumes and pressure, which may indicate that the earthquakes were directly caused by the pressure buildup and stopped when pressure dropped. On June 19, 2012, the United States Senate Committee on Energy & Natural Resources held a hearing entitled, "Induced Seismicity Potential in Energy Technologies." Dr. Murray Hitzman, the Charles F. Fogarty Professor of Economic Geology in the Department of Geology and Geological Engineering at the Colorado School of Mines in Golden, CO testified that "About 35,000 hydraulically fractured shale gas wells exist in the United States. Only one case of felt seismicity in the United States has been described in which hydraulic fracturing for shale gas development is suspected, but not confirmed. Globally only one case of felt induced seismicity at Blackpool, England has been confirmed as being caused by hydraulic fracturing for shale gas development." [73]
The relative impacts of natural gas and coal
Human health impacts
A comprehensive review of the public health effects of energy fuel cycles in Europe finds that coal causes 6 to 98 deaths per TWh (average 25 deaths per TWh), compared to natural gas’ 1 to 11 deaths per TWh (average 3 deaths per TWh). These numbers include both accidental deaths and pollution-related deaths.[74] Coal mining is one of the most dangerous professions in the United States, resulting in between 20 and 40 deaths annually, compared to between 10 and 20 for oil and gas extraction.[75] Worker accident risk is also far higher with coal than gas. In the United States, the oil and gas extraction industry is associated with one to two injuries per 100 workers each year. Coal mining, on the other hand, contributes to four injuries per 100 workers each year. Coal mines collapse, and can take down roads, water and gas lines, buildings and many lives with them.[76]Average damages from coal pollutants are two orders of magnitude larger than damages from natural gas. SO2, NOx, and particulate matter from coal plants create annual damages of $156 million per plant compared to $1.5 million per gas plant.[77] Coal-fired power plants in the United States emit 17-40 times more SOx emissions per MWh than natural gas, and 1-17 times as much NOx per MWh.[78] Lifecycle CO2 emissions from coal plants are 1.8-2.3 times greater (per KWh) than natural gas emissions.[79]
The air quality advantages of natural gas over coal have been borne out in Pennsylvania, according to studies by the RAND Corporation and the Pennsylvania Department of Environmental Protection. The shale boom in Pennsylvania has led to dramatically lower emissions of sulfur dioxide, fine particulates, and volatile organic compounds (VOCs).[12]
Noted physicist Richard A. Muller argues that the public health benefits from shale gas, by displacing harmful air pollution from coal, far outweigh its environmental costs. In a 2013 report for the Centre for Policy Studies, Muller writes that air pollution, mostly from coal burning, kills over three million people each year, primarily in the developing world. The report states that "Environmentalists who oppose the development of shale gas and fracking are making a tragic mistake." [13]
Landscape impacts
Coal mining radically alters whole mountain and forest landscapes. Beyond the coal removed from the earth, large areas of forest are turned inside out and blackened with toxic and radioactive chemicals. There have been reclamation successes, but hundreds of thousands of acres of abandoned surface mines in the United States have not been reclaimed, and reclamation of certain terrain (including steep terrain) is nearly impossible.[80]Where coal exploration requires altering landscapes far beyond the area where the coal is, aboveground natural gas equipment takes up just one percent of the total surface land area from where gas will be extracted.[81] The environmental impact of gas drilling has changed radically in recent years. Vertical wells into conventional formations used to take up one-fifth of the surface area above the resource, a twenty-fold higher impact than current horizontal drilling requires. A six-acre horizontal drill pad can thus extract gas from an underground area 1,000 acres in size.
The impact of natural gas on landscapes is even less and shorter in duration than the impact of wind turbines. The footprint of a shale gas derrick (3-5 acres) is only a little larger than the land area necessary for a single wind turbine.[82] But it requires less concrete, stands one-third as tall, and is present for just 30 days instead of 20–30 years. Between 7 and 15 weeks are spent setting up the drill pad and completing the actual hydraulic fracture. At that point, the drill pad is removed, leaving behind a single garage-sized wellhead that remains for the lifetime of the well.
Water
With coal mining, waste materials are piled at the surface of the mine, creating aboveground runoff that pollutes and alters the flow of regional streams. As rain percolates through waste piles, soluble components are dissolved in the runoff and cause elevated total dissolved solids (TDS) levels in local water bodies.[80] Sulfates, calcium, carbonates and bicarbonates – the typical runoff products of coalmine waste materials – make water unusable for industry or agriculture and undrinkable for humans.[83] Acid mine wastewater can drain into groundwater, causing significant contamination. Explosive blasting in a mine can cause groundwater to seep to lower-than-normal depths or connect two aquifers that were previously distinct, exposing both to contamination by mercury, lead, and other toxic heavy metals.Contamination of surface waterways and groundwater with fracking fluids can be problematic. Shale gas deposits are generally several thousand feet below ground. There have been instances of methane migration, improper treatment of recovered wastewater, and pollution via reinjection wells.
In most cases, the life-cycle water intensity and pollution associated with coal production and combustion far outweigh those related to shale gas production. Coal resource production requires at least twice as much water per million British thermal units (mmBTU) compared to shale gas production.[84] And while regions like Pennsylvania have experienced an absolute increase in water demand for energy production thanks to the shale boom, shale wells actually produce less than half the wastewater per unit of energy compared to conventional natural gas.[81]
Coal-fired power plants consume two to five times as much water as natural gas plants. Where 520-1040 gallons of water are required per MWh of coal, gas-fired combined cycle power requires 130-500 gallons per MWh.[78] The environmental impact of water consumption at the point of power generation depends on the type of power plant: plants either use evaporative cooling towers to release excess heat or discharge water to nearby rivers.[85] Natural gas combined-cycle power (NGCC), which captures the exhaust heat generated by combusting natural gas to power a steam generator, are considered the most efficient large-scale thermal power plants. One study found that the life-cycle demand for water from coal power in Texas could be more than halved by switching the fleet to NGCC.[86]
All told, shale gas development in the United States represents less than half a percent of total domestic freshwater consumption, although this portion can reach as high as 25 percent in particularly arid regions.[87]
Economics
See also: Natural gas prices
Although shale gas has been produced for more than 100 years in the Appalachian Basin and the Illinois Basin
of the United States, the wells were often marginally economic.
Advances in hydraulic fracturing and horizontal completions have made
shale-gas wells more profitable.[88]
Improvements in moving drilling rigs between nearby locations, and the
use of single well pads for multiple wells have increased the
productivity of drilling shale gas wells.[89] As of June 2011, the validity of the claims of economic viability of these wells has begun to be publicly questioned.[90] Shale gas tends to cost more to produce than gas from conventional wells, because of the expense of the massive hydraulic fracturing treatments required to produce shale gas, and of horizontal drilling.[91]The cost of extracting offshore shale gas in the UK were estimated to be more than $200 per barrel of oil equivalent (UK North Sea oil prices were about $120 per barrel in April 2012). However, no cost figures were made public for onshore shale gas.[92]
North America has been the leader in developing and producing shale gas. The economic success of the Barnett Shale play in Texas in particular has spurred the search for other sources of shale gas across the United States and Canada,[citation needed]
Some Texas residents think fracking is using too much of their groundwater, but drought and other growing uses are also part of the causes of the water shortage there.[93]
A Visiongain research report calculated the 2011 worth of the global shale-gas market as $26.66 billion.[94]
A 2011 New York Times investigation of industrial emails and internal documents found that the financial benefits of unconventional shale gas extraction may be less than previously thought, due to companies intentionally overstating the productivity of their wells and the size of their reserves.[95]
In first quarter 2012, the United States imported 840 billion cubic feet (Bcf) (785 from Canada) while exporting 400 Bcf (mostly to Canada); both mainly by pipeline.[96] Almost none is exported by ship as LNG, as that would require expensive facilities. In 2012, prices went down to $3/MMBtu due to shale gas.[97]
A recent academic paper on the economic impacts of shale gas development in the US finds that natural gas prices have dropped dramatically in places with shale deposits with active exploration. Natural gas for industrial use has become cheaper by around 30% compared to the rest of the US.[98] This stimulates local energy intensive manufacturing growth, but brings the lack of adequate pipeline capacity in the US in sharp relief.[99]
Texas residents think fracking is using too much of their groundwater, but drought and other growing uses are also part of the causes of the water shortage there. One of the byproducts of shale gas exploration is the opening up of deep underground shale deposits to "tight oil" or shale oil production. By 2035, shale oil production could "boost the world economy by up to $2.7 trillion, a PricewaterhouseCoopers (PwC) report says. It has the potential to reach up to 12 percent of the world’s total oil production — touching 14 million barrels a day — “revolutionizing” the global energy markets over the next few decades." [18]
According to a 2013 Forbes magazine article, generating electricity by burning natural gas is cheaper than burning coal if the price of gas remains below $3/mmBTU.[23]
Nenhum comentário:
Postar um comentário